As can happen with any mobile device, the Huawei P30 Lite or Pro cell phone can get stuck on the logo when it restarts. In many cases, it does not usually take too long after restarting for the device to continue with its power-on protocol.
From the Huawei platform, you can find solutions for this. Most people often confuse the protocols that work for this problem. All this is given because some alternatives are not applied correctly for the solutions sought.
That is why here you can find more precise solutions that will be applied when your Huawei P30 Lite or Pro cell phone restarts and remains stuck on the logo.
How to Fix Your Huawei P30 Lite or Pro cell phone restarting and the logo stays stuck
Reboot the device in “Safe Mode”
In the first instance, you have to check if the problem is not because an application has recently been installed on the device. This can be verified when the cell phone is restarted in “Safe Mode,” being a simple process to perform.
First, the phone must be turned off and on until the Huawei logo appears. After doing this, release the power button and hold the volume down button to start the device.
It must be released as soon as “Safe Mode” is visible in the cell phone screen’s lower-left corner. If the device can start, the problem is in a recently installed application. Trying to uninstall it to see if you can fix the problem.
If you fail to solve the problem, you can format or restart the Huawei P30 Lite or Pro operating system.
Do a Hard Reset
The process to make a Hard Reset to a Huawei phone is easy to carry out, following some steps to the letter for its effectiveness. The first thing to do is enter Recovery mode. You need to turn off the device for this.
Considering this, you can switch on the phone with the power button and the volume down button while pressing them at the same time for 10 seconds. Thus, you enter the Recovery mode, in which a menu will appear in which you need the volume + and down keys to navigate.
As soon as you find the wipe data/factory reset, move on to it and enter it by clicking on the lock key. You can see that it asks if you are sure you want to format the cell phone and lose the stored data. Press “Yes All” to confirm and follow the procedure.
You enter the main menu again, finding the options at the beginning, searching, and pressing Reboot system now. Thus, the formatting and reinstallation of the operating system starts. This results in being able to turn on the cell phone correctly.
Can the Huawei P30 Lite or Pro cell phone get stuck on the logo when it restarts?
Although it is a not-so-common case, it is possible that this incident could happen again on the Huawei cell phone. In case this happens, it is advisable to resort again to these found solutions, easily solving the situation.
However, you can apply this and fail to get the desired results. In that case, alternatives such as updating the Huawei phone software to the latest version can be used.
All of this is because it may be a reason for it to freeze in the startup logo in some way or another. Even if it is this way, it does not mean that it is the reason why it occurs. This is because it is an extreme situation.
Once you take this measure, you can use the cell phone and its applications without any problem. This makes it understandable that the Huawei P30 Lite or Pro is one of the most prominent models of this brand.
Each part of the solutions found makes good use of Huawei’s Android options. You can keep using the device normally. Also, it highlights the possibility of detecting other problems due to slightly more extreme inconveniences.
